| J30J Series Micro-D Rectangular Connector Specifications | |
|---|---|
| Operating Temperature | -55℃ to +125℃ |
| Salt Spray Resistance | 96 hours |
| Rated Current | 3A per contact |
| Mating Cycles | 500 cycles |
| Contact Resistance | ≤10mΩ |
| Shock Resistance | 735m/s² (75G) acceleration |
| Example Model | HW-J30J-37TJS |
| Contact Configuration | 37-position, Male Pin (Welded Type) |
| Contact Spacing | 1.27mm (0.050″) |
| HW-J30J-37TJS Model Breakdown | |
|---|---|
| HW | Manufacturer prefix |
| J30J | Series designation |
| 37 | 37 contacts |
| TJ | Male pin connector |
| S | Welded termination |
The product has the advantages of high density, lightweight and miniaturization, which can realize the reliable interconnection of the electrical circuit system from cable to cable, cable to printed board, and between printed board and printed board.
The product can withstand strong vibration, shock and other harsh operating environment, especially suitable for the use of space, equipment lightweight has special requirements for the use of the occasion.
THE J30J SERIES CONNECTOR FEATURES:
Conforms to GJB2446A (equivalent to MIL-C-83513)
Male pin is twist pin
High-density contact, spacing 1.27mm
metal shield shell, equivalent to the American MDM series
There are 11 specifications including 9-144 cores
There are tail end changes that apply to the hole spacing of the printed board
Implement enterprise standards:
J30J series ordinary products: 21E0.204.118JT
J30JM series rubber seal products: Q/21EJ618
J30J series glass sintering seal products: Q/21EJ1001
How to order:
J30J X -X ZK/TJ X X -X X X
Basic series
J30J -Basic type
J30JC-Nickel copper plating
(weldable)
J30JS-Passivation of stainless steel
(not weldable)
Serial variant
Unmarked: Basic type
A:Quick lock
E:The connector housing height is
reduced from the basic type
M:Rubber sealing product
R :Contact pin,Jack are mounted in
reverse
Number of contacts:
9,15,21,25,31,37,51,66,74,100,144 Core
Electrical connector type:
ZK:The socket is equipped with a jack,TJ:The plug is inserted into the pin
ZJ:The socket is equipped with a pin, TK:The plug is inserted into a jack
Contact end form:
No mark-Type of crimping
S – Type of Welding
N,N3,N8,N12-Horizontal PCB model, the grid spacing of PCB is 2.54×2.54,
in which type N is the basic type product
W-90° PCB model, the grid spacing of PCB is 2.54×2.54
Type of locking and mounting components:
No mark – Default locking component((Type L with wire or welded plug , type P with wire or welded socket, type P7 with 90°PCB products and type P5 with horizontal PCB products)
Y-No locking component is provided
Common locking components – such as L, K, P, etc., see the locking component type and instructions
Modified product identification(If it is multiple, write in alphabetical order, such as -AD, -JQ, etc.) :
A -The product conductor is covered with wave proof sleeve, and the tail has a clamping plate
D -The shell is added with anti-rotating structure
D2 -Screw compression spring and screw locking structure, plug matching clamp wire
J -printed board grid spacing changed to 1.27×2.54
Q,Q8 -Shell flange is widened
R4,Q4-The locking structure adopts the spring fast locking structure
Attachment identification:
A1-Tail clamp accessories (only suitable for wire pressing and welding products)
A3-Tail clamp accessories (only suitable for wire pressing and welding products)
Specific requirements for conductors:
Including wire cross-sectional area, color, length, external protection, etc., (Only suitable for pressed wire products)
The product has the advantages of high density, lightweight and miniaturization, which can realize the reliable interconnection of the electrical circuit system from cable to cable, cable to printed board, and between printed board and printed board.
The product can withstand strong vibration, shock and other harsh operating environment, especially suitable for the use of space, equipment lightweight has special requirements for the use of the occasion.
THE J30J SERIES CONNECTOR FEATURES:
Conforms to GJB2446A (equivalent to MIL-C-83513)
Male pin is twist pin
High-density contact, spacing 1.27mm
metal shield shell, equivalent to the American MDM series
There are 11 specifications including 9-144 cores
There are tail end changes that apply to the hole spacing of the printed board
Implement enterprise standards:
J30J series ordinary products: 21E0.204.118JT
J30JM series rubber seal products: Q/21EJ618
J30J series glass sintering seal products: Q/21EJ1001
How to order:
J30J X -X ZK/TJ X X -X X X
Basic series
J30J -Basic type
J30JC-Nickel copper plating
(weldable)
J30JS-Passivation of stainless steel
(not weldable)
Serial variant
Unmarked: Basic type
A:Quick lock
E:The connector housing height is
reduced from the basic type
M:Rubber sealing product
R :Contact pin,Jack are mounted in
reverse
Number of contacts:
9,15,21,25,31,37,51,66,74,100,144 Core
Electrical connector type:
ZK:The socket is equipped with a jack,TJ:The plug is inserted into the pin
ZJ:The socket is equipped with a pin, TK:The plug is inserted into a jack
Contact end form:
No mark-Type of crimping
S – Type of Welding
N,N3,N8,N12-Horizontal PCB model, the grid spacing of PCB is 2.54×2.54,
in which type N is the basic type product
W-90° PCB model, the grid spacing of PCB is 2.54×2.54
Type of locking and mounting components:
No mark – Default locking component((Type L with wire or welded plug , type P with wire or welded socket, type P7 with 90°PCB products and type P5 with horizontal PCB products)
Y-No locking component is provided
Common locking components – such as L, K, P, etc., see the locking component type and instructions
Modified product identification(If it is multiple, write in alphabetical order, such as -AD, -JQ, etc.) :
A -The product conductor is covered with wave proof sleeve, and the tail has a clamping plate
D -The shell is added with anti-rotating structure
D2 -Screw compression spring and screw locking structure, plug matching clamp wire
J -printed board grid spacing changed to 1.27×2.54
Q,Q8 -Shell flange is widened
R4,Q4-The locking structure adopts the spring fast locking structure
Attachment identification:
A1-Tail clamp accessories (only suitable for wire pressing and welding products)
A3-Tail clamp accessories (only suitable for wire pressing and welding products)
Specific requirements for conductors:
Including wire cross-sectional area, color, length, external protection, etc., (Only suitable for pressed wire products)
